[chirp_users] Fwd: baofeng 82c

[Jim Unroe]

On Sun, Apr 2, 2017 at 6:14 PM, Jim McIver <jmciver at lmtribune.com> wrote:
> I've been putting kenwood QT/DQT enc in the chirp ToneSql, and where kenwood
> TX
>  and RX are the same, I still put kenwood QT/DQT enc in ToneSql, but don't
> know if Tone should be TSQL, None, or Tone.

It is covered in the guides in the link that I provided.

When...

Tone Mode= (None), both the Tone and ToneSql columns are ignored

Tone Mode= Tone, the Tone column is used to specify the TX CTCSS tone
and the ToneSql column is ignore (RX is carrier squelch).

Tone Mode= TSQL, the Tone column is ignored and the ToneSql is used to
specify the TX/RX CTCSS tone.

If you click View and enable "Hide Unused Fields" then only the
selective squelch columns that are being used will have values in
them.

Jim KC9HI