[chirp_users] Fwd: baofeng 82c

[Jim McIver]

Ok. So that means all my channels need to be TSQL if I am to be able to transmit and receive, if that's the only one where you can TX and RX. Unhiding the fields allowed me to see it was putting info in Tone and ToneSql even though hidden the Tone showed blank. 

thx, 
-jm 


From: "Jim Unroe" <rock.unroe at gmail.com> 
To: "Chirp" <chirp_users at intrepid.danplanet.com> 
Sent: Sunday, April 2, 2017 3:27:22 PM 
Subject: Re: [chirp_users] Fwd: baofeng 82c 

On Sun, Apr 2, 2017 at 6:14 PM, Jim McIver <jmciver at lmtribune.com> wrote: 
> I've been putting kenwood QT/DQT enc in the chirp ToneSql, and where kenwood 
> TX 
> and RX are the same, I still put kenwood QT/DQT enc in ToneSql, but don't 
> know if Tone should be TSQL, None, or Tone. 

It is covered in the guides in the link that I provided. 

When... 

Tone Mode= (None), both the Tone and ToneSql columns are ignored 

Tone Mode= Tone, the Tone column is used to specify the TX CTCSS tone 
and the ToneSql column is ignore (RX is carrier squelch). 

Tone Mode= TSQL, the Tone column is ignored and the ToneSql is used to 
specify the TX/RX CTCSS tone. 

If you click View and enable "Hide Unused Fields" then only the 
selective squelch columns that are being used will have values in 
them. 

Jim KC9HI 
_______________________________________________ 
chirp_users mailing list 
chirp_users at intrepid.danplanet.com 
http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
This message was sent to Jim M at jmciver at lmtribune.com 
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170402/e582ecfd/attachment.html