[chirp_users] Fwd: baofeng 82c

[Jim McIver]

Tried leaving a blank row in chirp, but I loaded to radio, it just moved row below up into blank. Radio is or Search and Rescue, so yes I will want to RX and TX. Wished I could send screenshots of what kenwood columns look like, but message size to big. I'll checkout links below. 
thx, 
-jm 

From: "Jim Unroe" <rock.unroe at gmail.com> 
To: "Chirp" <chirp_users at intrepid.danplanet.com> 
Sent: Sunday, April 2, 2017 3:09:09 PM 
Subject: Re: [chirp_users] Fwd: baofeng 82c 

On Sun, Apr 2, 2017 at 5:37 PM, Jim McIver <jmciver at lmtribune.com> wrote: 
> Purchased a baofeng uv-82c as a backup for my kenwood tk-2170. Chirp won't 
> read the tk-2170 so I am trying to match columns from kenwood program to 
> chirp and don't know what goes where. Where can I get help to make the 
> baofeng work? 
> 
> Attached is what I'm up against. Yes, I've read through all I can find about 
> the baofeng, but lack the knowledge to know all the terminology. Is there a 
> cross reference from kenwood columns to chirp columns? 
> 
> I think I have rows 0 through 6 correct, but now sure about 7 through 10. 
> That's as far as I've gotten. The rest of the rows came from someone's not 
> in my area. 
>adi 
> Q? how can I leave a blank line in the chirp? 

I'm not sure you are asking what you want. If you want to leave a 
memory empty, don't program it. 

> 
> Q? Does kenwood QT/DQT Enc go into Chirp ToneSql? 

Depends on what you want. If you want to TX a tone and have no receive tone: 
Tone Mode: Tone 
Tone: {the TX CTCSS tone} 

If you want to TX and RX with the same tone: 
Tone Mode: TSQL 
ToneSql: {the TX/RX tone} 

The link for section 6 on this page has some guides and references 
including some CHIRP "column" guides. 

http://www.miklor.com/COM/UV_CHIRP.php 

> 
> Q? How do I know if TSQL is correct Tone Mode in Chirp or should I be using 
> something else in this column? 

Depends. See above comment and guides. 

> 
> Q? Where do I put the 203.5 from kenwood QT/DQT Dec & QT/DQT Enc in Chirp? 

Depend on if you want to TX the tone only or if you want to TX and RX 
with the same tone. See above. 

> 
> thx, 
> 
> -Jim McIver 


Jim kC9HI 
_______________________________________________ 
chirp_users mailing list 
chirp_users at intrepid.danplanet.com 
http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
This message was sent to Jim M at jmciver at lmtribune.com 
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170402/a65dc701/attachment.html