[chirp_users] Fwd: baofeng 82c

[Rich Messeder]

Hi jm,
On Windows there is a Windows tool called snippet. You can use it to select as small a region of the display as you want. I imagine the result would be about 10K if you can use it.

73
~R~ NE1EE

On 2017-04-02 15:19:-0700, Jim McIver wrote:
>Tried leaving a blank row in chirp, but I loaded to radio, it just moved row below up into blank. Radio is or Search and Rescue, so yes I will want to RX and TX. Wished I could send screenshots of what kenwood columns look like, but message size to big. I'll checkout links below.
>thx,
>-jm
>
>----------
>From: "Jim Unroe" <rock.unroe at gmail.com>
>To: "Chirp" <chirp_users at intrepid.danplanet.com>
>Sent: Sunday, April 2, 2017 3:09:09 PM
>Subject: Re: [chirp_users] Fwd: baofeng 82c
>
>On Sun, Apr 2, 2017 at 5:37 PM, Jim McIver <jmciver at lmtribune.com> wrote:
>> Purchased a baofeng uv-82c as a backup for my kenwood tk-2170. Chirp won't
>> read the tk-2170 so I am trying to match columns from kenwood program to
>> chirp and don't know what goes where. Where can I get help to make the
>> baofeng work?
>>
>> Attached is what I'm up against. Yes, I've read through all I can find about
>> the baofeng, but lack the knowledge to know all the terminology. Is there a
>> cross reference from kenwood columns to chirp columns?
>>
>> I think I have rows 0 through 6 correct, but now sure about 7 through 10.
>> That's as far as I've gotten. The rest of the rows came from someone's not
>> in my area.
>>adi
>> Q? how can I leave a blank line in the chirp?
>
>I'm not sure you are asking what you want. If you want to leave a
>memory empty, don't program it.
>
>>
>> Q? Does kenwood QT/DQT Enc go into Chirp ToneSql?
>
>Depends on what you want. If you want to TX a tone and have no receive tone:
>Tone Mode: Tone
>Tone: {the TX CTCSS tone}
>
>If you want to TX and RX with the same tone:
>Tone Mode: TSQL
>ToneSql: {the TX/RX tone}
>
>The link for section 6 on this page has some guides and references
>including some CHIRP "column" guides.
>
>http://www.miklor.com/COM/UV_CHIRP.php
>
>>
>> Q? How do I know if TSQL is correct Tone Mode in Chirp or should I be using
>> something else in this column?
>
>Depends. See above comment and guides.
>
>>
>> Q? Where do I put the 203.5 from kenwood QT/DQT Dec & QT/DQT Enc in Chirp?
>
>Depend on if you want to TX the tone only or if you want to TX and RX
>with the same tone. See above.
>
>>
>> thx,
>>
>> -Jim McIver
>
>
>Jim kC9HI
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Jim M at jmciver at lmtribune.com
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to WeatheredSoul at rich.messeder at gmail.com
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com