[chirp_users] HTX 202

[Ronny Julian]

NONE of these can be modded outside 144-148.  I've heard it said so many
times but no one has shown it as working.

On Tue, Oct 25, 2016 at 10:18 PM, Glenn <glennervin at cableone.net> wrote:

> I have wondered if they have a micro battery.
> I had one unit that was the last of the ones that could be modded, and
> while it was under warranty, mine pooped out, so RS gave me a new one in
> replacement, but it could not be modded.
> I seem to remember that the mod would expand the frequencies.
> Glenn
>
> ----- Original Message -----
> *From:* Randy Elliott <ve3jpu at me.com>
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Sent:* Tuesday, October 25, 2016 7:07 AM
> *Subject:* Re: [chirp_users] HTX 202
>
> Hi Glenn
> I will agree with Ronny. The 202 was built strictly for the ham band with
> no out of band receive or transmit. It had an exceptional RX front end
> rejection of out of band junk compared to today's radios.
> By today's radios it is big but it works great, I still use mine. I've had
> to replace the micro battery inside but it's still ticking.
>
> Randy
> VE3JPU at me.com
>
>
> On Oct 24, 2016, at 11:45 PM, Ronny Julian <k4rjjradio at gmail.com> wrote:
>
> Glen it was based on the 02AT.  NOT PC programmable.  It was made by
> Maxxon for Tandy.  It will also NEVER go out of the Ham bands no matter
> what someone puts on the Internet..  Good Radio!  If you want programming
> for a radio cross ship me your 202 and all the toys with it and I'll ship
> you a UV-5R  with big antenna, battery, and speaker mic.  No problem.  The
> 202 is a much better radio IMO.  And I have 2 UV5Rs.    K4RJJ Ronny
>
> On Mon, Oct 24, 2016 at 10:20 PM, Glenn <glennervin at cableone.net> wrote:
>
>> Hi,
>> The discussion of the iCom made me wonder if I would be able to dig out
>> my old HTX 202 that I got from Radio Shack about 25 years ago.
>> It was based on some iCom model, and my old radio has the same microphone
>> plug on the top as the one on my current radio.  The antenna and squelch
>> and volume buttons might get in the way though.
>> Thanks.
>>
>> Glenn
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Ronny Julian at k4rjjradio at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Skid at ve3jpu at me.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ronny Julian at k4rjjradio at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161025/7e79d208/attachment.html