[chirp_users] "Error Reading Data from Radio..."

[Jeff Hughes]

Hey Jim,

Thanks for the help.  I loaded the file you attached, per your instructions.  Same result/error.

When I click ‘File’ and then ‘Load Module’ and browse to the baofeng_common.py file there’s no message/confirmation upon opening the file.  Just goes back to the blank Chirp screen.  I assume that’s normal behavior.

Not sure what kind of file baofeng_common.py is (some sort of diagnostic?), but would the fact that my UV-5X3 is listed under ‘Btech’ rather than ‘Baofeng’ make any difference?  i.e. is there a ‘btech_common.py' file?

Thanks again.

Jeff




> On Oct 19, 2016, at 7:53 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> Jeff,
> 
> 1 save the attached file to where you keep you CHIRP Radio Images (*.img) files
> 2 click "Help"
> 3 enable "Enable Developer Functions"
> 4 click "File"
> 5 click "Load Module"
> 6 locate and load the file saved in step 1
> 
> Now try to read from your UV-5X3 and report back.
> 
> Jim
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161019/813188d3/attachment.html