[chirp_users] Baofeng 888s cable issue
Ronny Julian
Thu Nov 17 18:10:06 PST 2016
Wish I could say that any of the above worked. I verified the driver
version after the EXE installed it. Made sure the cable was plugged in
tight. No difference. Tried 4 radios. All go to TX. I'll build a Linux
box this weekend and see if that makes a difference. i planned on doing
this anyway. I also have a different cable set on the way from an eBay
seller.
Does anyone know an eBay seller that sells FTSDI cables that work well for
kenwood, Moto, and maybe even midland? I have a Titan that needs a few
added channels.
Thanks!
Ronny
K4RJJ
On Thu, Nov 17, 2016 at 8:30 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> On Thu, Nov 17, 2016 at 8:19 PM, Ronny Julian <k4rjjradio at gmail.com>
> wrote:
> > I have a couple of 888s UHF radios and the cable I have for them is
> coming
> > up on COM 3 Problem is the radio goes into transmit when connected to
> the
> > cable and turned on. The cable has worked on my UV-5R radios before but
> now
> > also puts them into transmit. The only thing that has changed is i have
> > gone to a laptop (Windows 10) to a desktop machine (Also Windows 10).
> >
> > Any ideas?
> >
> > Thanks!
> > Ronny
> > K4RJJ
> >
>
> This is a common problem. Your programming cable most likely has an
> unauthorized copy (aka counterfeit) Prolific chip in it. The driver
> auto installed by Windows for this chip is intentionally incompatible.
> You must download, install and select the older, but compatible,
> v3.2.0.0 driver.
>
> http://www.miklor.com/COM/UV_Drivers.php
>
> I have several installed for testing cables, but keep the v3.2.0.0
> driver selected most of the time because it works with genuine and
> not-so-genuine Prolific type chips.
>
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ronny Julian at k4rjjradio at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161117/accab92c/attachment.html
More information about the chirp_users
mailing list