[chirp_users] Unable to read from QYT KT-8900

Tue May 10 11:16:34 PDT 2016

The testing of the dev driver is going very well, it will worth a try, I 
will include it on the daily Chirp in the following days.

http://chirp.danplanet.com/issues/3539#note-12

Also I'm testing internally a new ALIAS feature recently implemented by 
Dan for managing the clones in a more user friendly manner.

73 CO7WT Pavel.

El 09/05/16 a las 23:57, Trevor Holyoak escribió:
> There is an experimental driver that was just provided in the KT8900 
> Yahoo Group. It works for my radio where it wasn't working before.
>
>> azrokitman at live.com <mailto:azrokitman at live.com>
>> Monday, May 09, 2016 8:40 PM
>>
>> I had the same issue with my QYT KT-8900. I used the Sainsonic 890 
>> radio setting and everything uploaded with no problem.
>>
>> Get Outlook for Android <https://aka.ms/ghei36>
>>
>>
>>
>>
>> I am not familiar with that radio but learned that my F8HP needs to 
>> be in Frequency mode vs Channel mode. Might be worth a look?
>>
>> On May 9, 2016 8:35 PM, "Larry Lovell" <larry.lovell76 at gmail.com 
>> <mailto:larry.lovell76 at gmail.com>> wrote:
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to trevor at holyoak.com at trevor at holyoak.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> Ted <mailto:tedfs3 at gmail.com>
>> Monday, May 09, 2016 8:34 PM
>>
>> I am not familiar with that radio but learned that my F8HP needs to 
>> be in Frequency mode vs Channel mode. Might be worth a look?
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to trevor at holyoak.com at trevor at holyoak.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> Larry Lovell <mailto:larry.lovell76 at gmail.com>
>> Monday, May 09, 2016 6:34 PM
>> Make sure that the Device Manager shows that the port is working 
>> properly.  It also shows which port to use.
>> Download the latest CHIRP software.  My KT8900 is now working 
>> properly with CHIRP.  CHIRP daily-20160507 is what I am using.
>>
>>
>>
>>
>> -- 
>> Larry Lovell
>> 73's N7RGW
>> Work: 208-557-4500
>> http://qrvtronics.com
>> Home: 208-356-7749
>> http://mormon.org/me/4V53/LarryLovell/
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to trevor at holyoak.com at trevor at holyoak.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> Paul Mann via chirp_users <mailto:chirp_users at intrepid.danplanet.com>
>> Monday, May 09, 2016 1:06 PM
>> I get the same message with my 8900.
>>
>>
>> On Monday, May 9, 2016 2:50 PM, F.Ketterman <f.ketterman at mail.com> wrote:
>>
>>
>> I have not been able to successfully read from my QYT KT-8900 radio I 
>> consistently receive the following message ‘An error has occurred’ 
>> ‘Radio identification failed.’  Note that this is with two different 
>> cables (one supplied with radio requiring older Prolific driver, and 
>> the other a brand new BTECH cable that I used without error to 
>> program my BTECH UV-2501+220).  I am using the latest version of 
>> CHIRP (daily-20160507) build on a Windows 10 x64 system.
>> Frank Ketterman
>> f.ketterman at mail.com <mailto:fnk at softhome.net>
>> www.survivalblog.net <http://www.survivalblog.net/>
>> AC0XV
>> Molon Labe!
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com 
>> <mailto:chirp_users at intrepid.danplanet.com>
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Paul Mann at pauledmann at yahoo.com 
>> <mailto:pauledmann at yahoo.com>
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com 
>> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to trevor at holyoak.com at trevor at holyoak.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> F.Ketterman <mailto:f.ketterman at mail.com>
>> Monday, May 09, 2016 12:50 PM
>>
>> I have not been able to successfully read from my QYT KT-8900 radio I 
>> consistently receive the following message ‘An error has occurred’ 
>> ‘Radio identification failed.’  Note that this is with two different 
>> cables (one supplied with radio requiring older Prolific driver, and 
>> the other a brand new BTECH cable that I used without error to 
>> program my BTECH UV-2501+220).  I am using the latest version of 
>> CHIRP (daily-20160507) build on a Windows 10 x64 system.
>>
>> Frank Ketterman
>>
>> f.ketterman at mail.com <mailto:fnk at softhome.net>
>>
>> www.survivalblog.net <http://www.survivalblog.net>
>>
>> AC0XV
>>
>> Molon Labe!
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to trevor at holyoak.com at trevor at holyoak.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> -- 
> Sent from Postbox 
> <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to M.Sc. Pavel Milanes Costa at pavelmc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160510/81ad66f0/attachment.html 