[chirp_users] Unable to read from QYT KT-8900

[Trevor Holyoak]

There is an experimental driver that was just provided in the KT8900 
Yahoo Group. It works for my radio where it wasn't working before.

> azrokitman at live.com <mailto:azrokitman at live.com>
> Monday, May 09, 2016 8:40 PM
>
> I had the same issue with my QYT KT-8900. I used the Sainsonic 890 
> radio setting and everything uploaded with no problem.
>
> Get Outlook for Android <https://aka.ms/ghei36>
>
>
>
>
> I am not familiar with that radio but learned that my F8HP needs to be 
> in Frequency mode vs Channel mode. Might be worth a look?
>
> On May 9, 2016 8:35 PM, "Larry Lovell" <larry.lovell76 at gmail.com 
> <mailto:larry.lovell76 at gmail.com>> wrote:
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to trevor at holyoak.com at trevor at holyoak.com
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> Ted <mailto:tedfs3 at gmail.com>
> Monday, May 09, 2016 8:34 PM
>
> I am not familiar with that radio but learned that my F8HP needs to be 
> in Frequency mode vs Channel mode. Might be worth a look?
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to trevor at holyoak.com at trevor at holyoak.com
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> Larry Lovell <mailto:larry.lovell76 at gmail.com>
> Monday, May 09, 2016 6:34 PM
> Make sure that the Device Manager shows that the port is working 
> properly.  It also shows which port to use.
> Download the latest CHIRP software.  My KT8900 is now working properly 
> with CHIRP.  CHIRP daily-20160507 is what I am using.
>
>
>
>
> -- 
> Larry Lovell
> 73's N7RGW
> Work: 208-557-4500
> http://qrvtronics.com
> Home: 208-356-7749
> http://mormon.org/me/4V53/LarryLovell/
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to trevor at holyoak.com at trevor at holyoak.com
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> Paul Mann via chirp_users <mailto:chirp_users at intrepid.danplanet.com>
> Monday, May 09, 2016 1:06 PM
> I get the same message with my 8900.
>
>
> On Monday, May 9, 2016 2:50 PM, F.Ketterman <f.ketterman at mail.com> wrote:
>
>
> I have not been able to successfully read from my QYT KT-8900 radio I 
> consistently receive the following message ‘An error has occurred’ 
> ‘Radio identification failed.’  Note that this is with two different 
> cables (one supplied with radio requiring older Prolific driver, and 
> the other a brand new BTECH cable that I used without error to program 
> my BTECH UV-2501+220).  I am using the latest version of CHIRP 
> (daily-20160507) build on a Windows 10 x64 system.
> Frank Ketterman
> f.ketterman at mail.com <mailto:fnk at softhome.net>
> www.survivalblog.net <http://www.survivalblog.net/>
> AC0XV
> Molon Labe!
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com 
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Paul Mann at pauledmann at yahoo.com 
> <mailto:pauledmann at yahoo.com>
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com 
> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to trevor at holyoak.com at trevor at holyoak.com
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> F.Ketterman <mailto:f.ketterman at mail.com>
> Monday, May 09, 2016 12:50 PM
>
> I have not been able to successfully read from my QYT KT-8900 radio I 
> consistently receive the following message ‘An error has occurred’ 
> ‘Radio identification failed.’  Note that this is with two different 
> cables (one supplied with radio requiring older Prolific driver, and 
> the other a brand new BTECH cable that I used without error to program 
> my BTECH UV-2501+220).  I am using the latest version of CHIRP 
> (daily-20160507) build on a Windows 10 x64 system.
>
> Frank Ketterman
>
> f.ketterman at mail.com <mailto:fnk at softhome.net>
>
> www.survivalblog.net <http://www.survivalblog.net>
>
> AC0XV
>
> Molon Labe!
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to trevor at holyoak.com at trevor at holyoak.com
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com

-- 
Sent from Postbox 
<https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160509/93af91ec/attachment.html