[chirp_users] Unable to read from QYT KT-8900

[azrokitman at live.com]

I had the same issue with my QYT KT-8900. I used the Sainsonic 890 radio setting and everything uploaded with no problem.


Get Outlook for Android






On Mon, May 9, 2016 at 7:35 PM -0700, "Ted" <tedfs3 at gmail.com> wrote:





I am not familiar with that radio but learned that my F8HP needs to be in
Frequency mode vs Channel mode. Might be worth a look?
On May 9, 2016 8:35 PM, "Larry Lovell" <larry.lovell76 at gmail.com> wrote:

> Make sure that the Device Manager shows that the port is working
> properly.  It also shows which port to use.
> Download the latest CHIRP software.  My KT8900 is now working properly
> with CHIRP.  CHIRP daily-20160507 is what I am using.
>
> On Mon, May 9, 2016 at 1:06 PM, Paul Mann via chirp_users <
> chirp_users at intrepid.danplanet.com> wrote:
>
>> I get the same message with my 8900.
>>
>>
>> On Monday, May 9, 2016 2:50 PM, F.Ketterman <f.ketterman at mail.com> wrote:
>>
>>
>> I have not been able to successfully read from my QYT KT-8900 radio I
>> consistently receive the following message ‘An error has occurred’ ‘Radio
>> identification failed.’  Note that this is with two different cables (one
>> supplied with radio requiring older Prolific driver, and the other a brand
>> new BTECH cable that I used without error to program my BTECH
>> UV-2501+220).  I am using the latest version of CHIRP (daily-20160507)
>> build on a Windows 10 x64 system.
>>
>> Frank Ketterman
>> f.ketterman at mail.com <fnk at softhome.net>
>> www.survivalblog.net
>> AC0XV
>> Molon Labe!
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Paul Mann at pauledmann at yahoo.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Larry Lovell at larry.lovell76 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
>
> --
> Larry Lovell
> 73's N7RGW
> Work: 208-557-4500
> http://qrvtronics.com
> Home: 208-356-7749
> http://mormon.org/me/4V53/LarryLovell/
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ted Strassburg at tedfs3 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160510/d7b60d46/attachment.html 
-------------- next part --------------
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John Wolven at azrokitman at live.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com