[chirp_users] Error importing to VV-898

[Marc Fuller]

Oh and I've got round it now.. I copied and pasted all the entries instead of importing, then saved :) 

Thanks

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: 22 January 2016 17:38
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Error importing to VV-898

On Fri, Jan 22, 2016 at 12:02 PM, Marc Fuller <marc at serenitymeadow.com> wrote:
> Hi All,
>
>
>
> Just purchased a Leixen VV-898. Downloaded the base image from the 
> radio no problem. Went to import a CSV file of my channels and getting 
> the following error..
>
>
>
>
>
> The same CSV file is OK for all my other radio’s, but not to Leixen. 
> Once you press OK, the whole program hangs.
>
>
>
> Any help appreciated.
>
>
>
> Marc
>

Read the error message. You have a channel with the CTCSS tone to 63.0 Hz. It is not valid for the VV-898 driver. Change the tone to one of the listed valid tones, remove the tone or remove the channel.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com