[chirp_users] Wouxun KG-UV3D CHIRP support and a question on the memory chip replacement

[Jim Unroe]

Hi Robert,

Use KG-UVD1P for the UV2D and UV3D. It looks to me like you download
and use the "rescue" image from the webpage that you referenced.

Jim KC9HI

On Sat, Jan 16, 2016 at 1:12 PM, Robert Morningstar
<bobmorning at gmail.com> wrote:
> Hi,
>
> I am a bit confused about CHIRP support for this radio.  It is listed on
> the home page, but the software does not present this model in the
> dropdown list when I attempt to download from it and I do not see it in
> the model_supported.html file on the download page.
>
> Can someone clarify this for me?   I need to write a new img to my radio
> I think.  I was successful in replacing the nvram chip (I had the
> infamous Wouxun radio losing it settings and memory issue) by following
> the process listed at http://tim-yvonne.com/ham/wouxun-memory/index.htm
> but the radio reverted to some other band than what I purchased it for
> (this problem also documented at the site listed above) after I
> completed the memory replacement procedure.
>
> I'm stuck,  I fixed the memory issue and tested it by manually
> programming two channels and those settings were retained after removing
> the battery and reinstalling it.   But now I am getting the Channel Freq
> Out of Range issue for channels that previously worked just fine before
> the chip transplant.
>
> Any thoughts on this issue?
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com