[chirp_users] D-Star Programming

Ryan Collier
Tue Aug 30 01:08:01 PDT 2016


I have tried many times to use chirp to load my configuration on to the
dstar icom radio. There is something missing that will not upload everthing
correctly. My suggestion is to download the free icom software on there
site to program the 880.

On Aug 29, 2016 6:02 PM, "Dick Smith" <w4rss at radioclub.org> wrote:

> I have an ID-880H and want to program some D-star repeaters.  I've down
> the registration and have been okayed.
>
> I've read so many different posts about programming and watched so many
> videos, that I'm more or less completely confused about the operation.
>
> I downloaded what I have currently in the radio and noticed that in Chirp
> there seem to be fewer spots to put the D-star info.
>
> I feel like what is shown is all that's needed, but I want to make sure
> first.  I do have the original programming I did with the Icom software
> saved so I can reload it if necessary.
>
> I've also looked through the last 6-8 months of list archives and didn't
> find anything that was to helpful regarding the programming aspect.
>
> Any 880H users who might be able to shed some light on the whole subject
> for me?
>
> 73
> Dick
> W4RSS
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ryan at kb8pmy at kb8pmy.net
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160830/522ff2c1/attachment.html 


More information about the chirp_users mailing list