[chirp_users] D-Star Programming

[Brad]

Always download from the radio first! then make the changes then upload 
to the radio. also save a copy of the changes as a back up.


On 8/30/2016 4:08 AM, Ryan Collier wrote:
>
> I have tried many times to use chirp to load my configuration on to 
> the dstar icom radio. There is something missing that will not upload 
> everthing correctly. My suggestion is to download the free icom 
> software on there site to program the 880.
>
>
> On Aug 29, 2016 6:02 PM, "Dick Smith" <w4rss at radioclub.org 
> <mailto:w4rss at radioclub.org>> wrote:
>
>     I have an ID-880H and want to program some D-star repeaters.  I've
>     down the registration and have been okayed.
>
>     I've read so many different posts about programming and watched so
>     many videos, that I'm more or less completely confused about the
>     operation.
>
>     I downloaded what I have currently in the radio and noticed that
>     in Chirp there seem to be fewer spots to put the D-star info.
>
>     I feel like what is shown is all that's needed, but I want to make
>     sure first.  I do have the original programming I did with the
>     Icom software saved so I can reload it if necessary.
>
>     I've also looked through the last 6-8 months of list archives and
>     didn't find anything that was to helpful regarding the programming
>     aspect.
>
>     Any 880H users who might be able to shed some light on the whole
>     subject for me?
>
>     73
>     Dick
>     W4RSS
>

____________________________________________________________
www.theictm.org (Sponsored by Content.Ad)
1 Fruit That "Destroys" Diabetes
http://thirdpartyoffers.juno.com/TGL3131/57c578e5f3e9378e420b6st04vuc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160830/c1a8a2b0/attachment.html