[chirp_users] Radio did not respond error

[Glenn]

Hi Paul,
I cannot tell you about the light, as I cannot see mine, but my first question is, did you install the driver before plugging in the cable?
If you don't, Windows will install what it thinks is the right driver, and it may not be right.
If this is the case, delete the device driver for the device, and reinstall the one that came with your device.
Then I would unplug the device, reboot, and reinstall the driver, and then plug in the cable.
HTH.
Glenn
  ----- Original Message ----- 
  From: Paul Harris via chirp_users 
  To: chirp_users at intrepid.danplanet.com 
  Sent: Saturday, August 27, 2016 12:39 PM
  Subject: [chirp_users] Radio did not respond error


  Baofeng UV-5X3
  Cable PCO3 

  Had to get drivers to get to this stage but radio does not respond.  Do the red and green lights on cable  usb end have to remain on or just flash on when you plug in. Computers is a HP windows 7.
  Paul KB2VEC



------------------------------------------------------------------------------


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to Glenn at glennervin at cableone.net
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160827/d345fa72/attachment.html