[chirp_users] ID-880H

[Patrick Lang]

What version of Windows?

8 and 10 automatically found the driver on my valley cable

Sent from a tiny keyboard

> On Aug 23, 2016, at 8:14 PM, Glenn <glennervin at cableone.net> wrote:
> 
> Dick,
> If you are using Windows, you need to install the driver before ever 
> plugging in the cable, or you will have problems.
> In that instance, if it was plugged into windows without installing the 
> driver first, you may need to remove it from device manager, and install the 
> windows driver, and then plug it in again.
> I think Linux does not need a driver installed.
> Glenn
> ----- Original Message ----- 
> From: "Dick Smith" <w4rss at radioclub.org>
> To: <chirp_users at intrepid.danplanet.com>
> Sent: Tuesday, August 23, 2016 9:01 AM
> Subject: [chirp_users] ID-880H
> 
> 
> I received the programming cable from Valley Ent.  Plugged it in to the
> pc and to the 880h, but Chirp does not see it.  I downloaded the Icom
> clonging software and it works perfectly.
> 
> Any thoughts?
> 
> Dick
> W4RSS
> 
> 
> 
> 
> --------------------------------------------------------------------------------
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Patrick Lang at stickpatrick at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com