[chirp_users] ID-880H

[Glenn]

Dick,
If you are using Windows, you need to install the driver before ever 
plugging in the cable, or you will have problems.
In that instance, if it was plugged into windows without installing the 
driver first, you may need to remove it from device manager, and install the 
windows driver, and then plug it in again.
I think Linux does not need a driver installed.
Glenn
----- Original Message ----- 
From: "Dick Smith" <w4rss at radioclub.org>
To: <chirp_users at intrepid.danplanet.com>
Sent: Tuesday, August 23, 2016 9:01 AM
Subject: [chirp_users] ID-880H


I received the programming cable from Valley Ent.  Plugged it in to the
pc and to the 880h, but Chirp does not see it.  I downloaded the Icom
clonging software and it works perfectly.

Any thoughts?

Dick
W4RSS




--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com