[chirp_users] COM 5

[slynchmob at aol.com]

Name is Steve an glad it help
 
 
-----Original Message-----
From: Michael Brazier <mikeb1951 at optusnet.com.au>
To: 'Discussion of CHIRP' <chirp_users at intrepid.danplanet.com>
Sent: Sun, Sep 20, 2015 8:55 pm
Subject: Re: [chirp_users] COM 5


 
  
Hi (Sorry I couldn’t see a name on the email).
  
Thanks for your help Mate.  It has solved that issue and Chirp cloned my radio without any problem (had to change from COM 5 to 4).  Now I plug the UV-5RTP in and it goes to start to upload but then I get "An error has occurred - Radio did not respond.  Something in my brain is telling me I should be doing something else to prepare the radio but since my stroke the brain doesn't always work that well.  Any suggestions would be appreciated.
  
Kind regards,
  
Mick.
  
 
  
 
  
   
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of slynchmob at aol.com
Sent: Monday, September 21, 2015 12:32 AM
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] COM 5
  
  
 
  
   
You have to update driver for win 10 take a look http://www.miklor.com/COM/UV_Drivers.php good luck
  
  
   
 
  
  
   
 
  
  
   
-----Original Message-----
From: Michael Brazier <mikeb1951 at optusnet.com.au>
To: chirp_users <chirp_users at intrepid.danplanet.com>
Sent: Sun, Sep 20, 2015 8:57 am
Subject: [chirp_users] COM 5
   
    
     
      
Hi All
     
     
      
I have had Chirp for quite a few years but don’t let that fool you, I know nothing about it.  I purchased two Baofeng UV-5R+Plus radios a while ago and a friend used Chirp to clone his radio and then to set my two up.  I have used it a few times as I have recommended the Baofeng radios to others and then I have used Chirp to clone mine and set theirs up.  I am not sure what has happened but I have updated to a Toshiba laptop, I’ve just updated that to Windows 10,  and I downloaded the latest Chirp today.  It’s been a while since I last used Chirp and a friend has just purchased two Baofeng UV-5RTP radios and asked me to set them up.  When I opened Chirp I opened my radio image file and connected the new radio.  I get a COM 5 port error and that’s it.  I tried hooking my radio up but get the same error.  Not sure whether it’s relevant but I used the same original data cable as I did for my, and others, radios.  Any help would be greatly appreciated.
     
     
      
Kind regards,
     
     
      
Mick.
     
    
   
   
    
_______________________________________________
    
chirp_users mailing
    
list
    
chirp_users at intrepid.danplanet.com
    
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    
To
    
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
   
  
 


_______________________________________________
chirp_users mailing
list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150921/16de2349/attachment.html