[chirp_users] COM 5
Michael Brazier
Sun Sep 20 17:55:23 PDT 2015
Hi (Sorry I couldn’t see a name on the email).
Thanks for your help Mate. It has solved that issue and Chirp cloned my radio without any problem (had to change from COM 5 to 4). Now I plug the UV-5RTP in and it goes to start to upload but then I get "An error has occurred - Radio did not respond. Something in my brain is telling me I should be doing something else to prepare the radio but since my stroke the brain doesn't always work that well. Any suggestions would be appreciated.
Kind regards,
Mick.
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of slynchmob at aol.com
Sent: Monday, September 21, 2015 12:32 AM
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] COM 5
You have to update driver for win 10 take a look <http://www.miklor.com/COM/UV_Drivers.php> http://www.miklor.com/COM/UV_Drivers.php good luck
-----Original Message-----
From: Michael Brazier < <mailto:mikeb1951 at optusnet.com.au> mikeb1951 at optusnet.com.au>
To: chirp_users < <mailto:chirp_users at intrepid.danplanet.com> chirp_users at intrepid.danplanet.com>
Sent: Sun, Sep 20, 2015 8:57 am
Subject: [chirp_users] COM 5
Hi All
I have had Chirp for quite a few years but don’t let that fool you, I know nothing about it. I purchased two Baofeng UV-5R+Plus radios a while ago and a friend used Chirp to clone his radio and then to set my two up. I have used it a few times as I have recommended the Baofeng radios to others and then I have used Chirp to clone mine and set theirs up. I am not sure what has happened but I have updated to a Toshiba laptop, I’ve just updated that to Windows 10, and I downloaded the latest Chirp today. It’s been a while since I last used Chirp and a friend has just purchased two Baofeng UV-5RTP radios and asked me to set them up. When I opened Chirp I opened my radio image file and connected the new radio. I get a COM 5 port error and that’s it. I tried hooking my radio up but get the same error. Not sure whether it’s relevant but I used the same original data cable as I did for my, and others, radios. Any help would be greatly appreciated.
Kind regards,
Mick.
_______________________________________________
chirp_users mailing
list
<mailto:chirp_users at intrepid.danplanet.com> chirp_users at intrepid.danplanet.com
<http://intrepid.danplanet.com/mailman/listinfo/chirp_users> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To
unsubscribe, send an email to <mailto:chirp_users-unsubscribe at intrepid.danplanet.com> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150921/a9d526c8/attachment.html
More information about the chirp_users
mailing list