[chirp_users] COM 5

slynchmob at aol.com
Sun Sep 20 07:31:45 PDT 2015


You have to update driver for win 10 take a look http://www.miklor.com/COM/UV_Drivers.php good luck
 
 
-----Original Message-----
From: Michael Brazier <mikeb1951 at optusnet.com.au>
To: chirp_users <chirp_users at intrepid.danplanet.com>
Sent: Sun, Sep 20, 2015 8:57 am
Subject: [chirp_users] COM 5


 
  
Hi All
  
I have had Chirp for quite a few years but don’t let that fool you, I know nothing about it.  I purchased two Baofeng UV-5R+Plus radios a while ago and a friend used Chirp to clone his radio and then to set my two up.  I have used it a few times as I have recommended the Baofeng radios to others and then I have used Chirp to clone mine and set theirs up.  I am not sure what has happened but I have updated to a Toshiba laptop, I’ve just updated that to Windows 10,  and I downloaded the latest Chirp today.  It’s been a while since I last used Chirp and a friend has just purchased two Baofeng UV-5RTP radios and asked me to set them up.  When I opened Chirp I opened my radio image file and connected the new radio.  I get a COM 5 port error and that’s it.  I tried hooking my radio up but get the same error.  Not sure whether it’s relevant but I used the same original data cable as I did for my, and others, radios.  Any help would be greatly appreciated.
  
Kind regards,
  
Mick.
 


_______________________________________________
chirp_users mailing
list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150920/31bc8a5b/attachment.html 


More information about the chirp_users mailing list