[chirp_users] TYT 9800 / chirp driver

[Kent Garliepp]

Sorry, I only do Windows and Linux. I keep forgetting about Mac.
Kent
AF7QO
On Sep 15, 2015 4:17 PM, "Craig Ryan" <cryan2820 at ca.rr.com> wrote:

> RT Systems seems to only do Windows, not Mac.
>
>
> On Sep 15, 2015, at 3:53 PM, Kent Garliepp <kent.garliepp at gmail.com>
> wrote:
>
> I had the same problem, tried multiple USB ports on two computers, 2 op
> systems, and all the drivers I could find. Finally purchased a cable and
> software from RT Systems. Worked fine. I haven't tried the new cable with
> Chirp.
> Kent
> AF7QO
> On Sep 15, 2015 9:41 AM, "alfredmjones at yahoo.com" <al at aljones.us> wrote:
>
>> I need some ideas here.  I have a Baofeng UV82L that I program with Chirp
>> and have no problem cloning this for the various UV5? radios that people
>> have around here.  I'm comfortable with Chirp.
>>
>>
>>
>> Recently purchased a TYT 9800; I have no problem programming that from
>> the front panel, but I'm a computer junky and it's normally easier to enter
>> / fix radio data programmatically.
>>
>>
>>
>> Running Windows 10, updated; have a cable that claims to be a TYT (the
>> label on the cable); when plugged in device manager reports "Unknown USB
>> Device (Device Descriptor Request Failed)"
>>
>> The Prolific 3.2.0.0 driver announces itself as being available on com 4
>> when the Baofeng cable is plugged in; however I see no com ports available
>> for the TYT - I have not been able to get either the driver that came with
>> the disk or the one available fro Grapevine (retailer in Dallas) to install.
>>
>>
>>
>> Any comments / suggestions would be appreciated.  I'm at a loss.
>>
>> //al
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150915/0a7096fe/attachment.html