[chirp_users] TYT 9800 / chirp driver

[Craig Ryan]

RT Systems seems to only do Windows, not Mac.


> On Sep 15, 2015, at 3:53 PM, Kent Garliepp <kent.garliepp at gmail.com> wrote:
> 
> I had the same problem, tried multiple USB ports on two computers, 2 op systems, and all the drivers I could find. Finally purchased a cable and software from RT Systems. Worked fine. I haven't tried the new cable with Chirp.
> Kent
> AF7QO
> 
> On Sep 15, 2015 9:41 AM, "alfredmjones at yahoo.com <mailto:alfredmjones at yahoo.com>" <al at aljones.us <mailto:al at aljones.us>> wrote:
> I need some ideas here.  I have a Baofeng UV82L that I program with Chirp and have no problem cloning this for the various UV5? radios that people have around here.  I'm comfortable with Chirp.
> 
>  
> 
> Recently purchased a TYT 9800; I have no problem programming that from the front panel, but I'm a computer junky and it's normally easier to enter / fix radio data programmatically.
> 
>  
> 
> Running Windows 10, updated; have a cable that claims to be a TYT (the label on the cable); when plugged in device manager reports "Unknown USB Device (Device Descriptor Request Failed)"
> 
> The Prolific 3.2.0.0 driver announces itself as being available on com 4 when the Baofeng cable is plugged in; however I see no com ports available for the TYT - I have not been able to get either the driver that came with the disk or the one available fro Grapevine (retailer in Dallas) to install.
> 
>  
> 
> Any comments / suggestions would be appreciated.  I'm at a loss.
> 
> //al
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150915/2a02f249/attachment.html