[chirp_users] An error has occurred. Image not supported by radio:

[dwilson]

Ok, rats, and I thot I was doing so good... have no idea where the other
firmware came from because I don't own any other radios and have never been
in chirp before today, but nevertheless...

May I ask how you could tell about the BFB firmware?

I would like to confirm I understand what needs done here before I do it.

So now I need to actually upload an old build (7-14-2014) into chirp.
Then I go to the KC9HI site and click on the F5R3407 BF-F8HP(150319N)
(factory) img and that will load the factory image into chirp? (if I don't
have the old build loaded this wont work?) and then I need to upload the
factory file into radio 1 and then I have to reload the latest chirp build.
Do I have that right?

Will the other images I currently have in chirp be deleted when I load the
old version?

So grateful for your help...

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Saturday, September 12, 2015 6:06 PM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] An error has occurred. Image not supported by
radio:

Debra,

Yes. The squelch settings were changed in radio #1.

All three radios have the same N5R340A firmware. You should be able to able
to upload an image from any one of them to any one of the others.

The reason you can't (and it is a good thing you can't) is because someone
has uploaded and image from a radio with BFB firmware into radio #1. It
probably doesn't receive signal without pressing the [MONI] button. You
definitely do not want to upload BAO1.img into radio #2 or radio #3.

You need to follow the procedure in the link below and upload either
BAO2.img or BAO3.img (they are both identical) into radio #1.

http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R

Once radio #1 if fixed, be sure to upgrade back to the latest CHIRP daily
build.

Jim KC9HI

On Sat, Sep 12, 2015 at 8:40 PM, dwilson <dwilson223 at cox.net> wrote:
> You know, I think on the first radio I might have changed the service
settings before I actually saved the first file...
>
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15