[chirp_users] An error has occurred. Image not supported by radio:

[Jim Unroe]

On Sat, Sep 12, 2015 at 7:56 PM, dwilson <dwilson223 at cox.net> wrote:
> I have three radios. I used chirp to download an image of the first radio,
> made a few changes just to practice the process (added some NOAA
> frequencies), saved that file and uploaded it to radio 1. Changes uploaded
> fine.
>
>
>
> I thot’ I could use that same fine to upload to the other radios so they
> would all be set up the same?
>
>
>
> I downloaded the image of the second radio and saved it, then tried to
> upload the changed file from the first radio to the second but got this
> error:
>
> An error has occurred. Image not supported by radio: 'XXXXXXX' where each X
> is actually a rectangular box with an upper case X inside.
>
>
>
> I saw where someone else had this error and it was noted that the firmware
> was not the same for the two radios so I checked it and the firmware
> displayed in the Firmware Message 1 for both downloads is identical: N5R340A
>
>
>
> So I’m not sure where to go from here. I guess I can recreate all the
> changes in the download from the second radio (?) but kind of wanted to know
> what I am doing wrong so the upload of the image from the first radio is not
> being supported by the second?
>
>
>
> Thanks for your help!
>
> debra
>

All 14 characters of the firmware version must exactly match.

Download from all 3 radios and email them to me. I will take a look to
see what is going on.

Jim KC9HI