[chirp_users] Trying to upload to BaoFeng radio

[Whit Woodard]

I'll look at that, but I bought my cable from the manufacture when I bought the radio.  It is not an after market product.

Sent from my iPad

> On Sep 4, 2015, at 5:06 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
>> On Fri, Sep 4, 2015 at 7:25 PM, Dr. Whit Woodard <towhit at me.com> wrote:
>> Thanks, Nick.  I did as you suggested.  Downloaded python (again) and then
>> chirp-daily-20150814.  Same results.  I can open the .img file, but I can’t
>> upload to the radio or download from the radio.  I get an error message that
>> says "could not open port /dev/cu.PL2303-00001014: [Errno 2] No such file or
>> directory: '/dev/cu.PL2303-00001014’
>> 
>> Any other suggestions?
>> 
>> Thanks,
>> whit
>> 
> 
> First, I don't own a Mac or use a Mac, so weigh my advice accordingly...
> 
> The chip in most programming cables that report having a Prolific type
> chip is an unauthorized copy. The latest Prolific device driver is
> (intentionally) not compatible with unauthorized copies. You most
> likely have to replace your installed driver with one of the generic
> drivers listed on the "documentation" pages.
> 
> http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips
> 
> Others have recommended purchasing this compatible 3rd party driver.
> 
> https://www.mac-usb-serial.com/
> 
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com