[chirp_users] UV-5R Woes

[Lamar Brown]

Ok Jim here is my file. Look at it and tell what I need to do then.

Thanks,

Lamar

On Mon, Nov 9, 2015 at 3:37 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Mon, Nov 9, 2015 at 3:56 PM, Lamar Brown <dlamarbrown at gmail.com> wrote:
> > Jim
> > I'm at work right now so it will be tonight before I can send you my
> file.
> > So If I understand you right, for instance on a repeater that has the
> > frequency of 146.640 and the offset frequency was 146.040 I would need to
> > program them in then?
> >
> >
>
> Danny,
>
> Not exactly. You set Frequency="146.64000", Duplex="-" and
> Offset="0.60000". Then from that supplied information, CHIRP will
> compute the TX frequency (146.040) and store it along with the other
> channel information. Then when you upload to the radio, 146.640 (RX
> freq) and 146.040 (TX freq) are sent to the radio (along with the
> other channel data) because that is what it requires.
>
> Just to review, the radio's menu 25 [SFT-D] and menu 26 [OFFSET] only
> function and have a purpose in VFO (frequency) mode. These menus have
> absolutely no purpose (and therefor do not work) in MR (channel) mode.
> So the upper status display only shows "+" and "-" individually when
> the radio is in VFO mode. In MR mode the upper status display shows
> "+-" to indicate the RX frequency and TX frequency are not the same.
> It doesn't matter if you are programming the radio with CHIRP or the
> keypad, that's how the radio works.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151109/2b81de43/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Baofeng BF-F8HP Load 1.img
Type: application/octet-stream
Size: 6472 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151109/2b81de43/attachment.img