[chirp_users] Freq entry

[Gary Runningbear]

Thanks John, I was unaware that you could not override the previous data.
I'll start erasing and then saving and see if that helps things. Thank you
very much for the information.
On Nov 5, 2015 6:54 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Thu, Nov 5, 2015 at 12:13 PM, Gary Runningbear
> <runningbear2000 at gmail.com> wrote:
> > Just found another problem. I enter a frequency a ct tone and an offset
> and
> > save to a channel. This is in the VFO of Courts. then I go to channel
> mode
> > and pull up that channel and find that the CT tone and the offset have
> not
> > carried over. It is acting like a simplex frequency. did I do something
> > wrong or miss something?
> >
>
> These radios don't use "offsets" in their memory channels. So there
> are none to "carry over".
>
> CHIRP allows you to enter the channel data using RX frequency, shift
> direction and frequency offset, but it converts it to RX frequency and
> TX frequency and send that to the radio because that is what the radio
> requires.
>
> http://www.miklor.com/COM/UV_MenuDef.php
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151105/c2f14bef/attachment.html