[chirp_users] Radio Not Communicating With Laptop

[Rodger Hess]

I am having the same problem as Ray, but also with my TH 9800. The TYT 
software can't see
the radio either. So I don't think it is the plug on the Baofeng cable 
in my case.

Thanks for any help...

73
--Rodger
KK6OPW

On 11/5/2015 10:53 AM, Gary Runningbear wrote:
> Hi Dave, I don't believe there will be a need to be concerned with the port
> number if the prolific 2303 driver is downloaded and installed. when I did
> that it immediately recognized the circuitry in the patch cord.
> On Nov 5, 2015 1:51 PM, "dmdfacp at gmail.com" <dmdfacp at gmail.com> wrote:
>
>> How about your serial port ?  I just jumped in, so forgive me if I'm
>> redundant.
>> If you do not know which port is being used, unplug your USB-to-radio
>> cable at the computer end. Re-plug it and watch for a small notice
>> specifying the port to which the computer connected it. Verify that CHIRP
>> is looking at the correct port.
>> I just went through this, within the past half hour. Good luck. I'm a
>> newbie, here, too.
>> Dave
>>
>> Sent from my iPhone
>> DSP
>>
>> On Nov 5, 2015, at 1:08 PM, Ray Nelson via chirp_users <
>> chirp_users at intrepid.danplanet.com> wrote:
>>
>> I've downloaded the software & installed. I keep getting error message the
>> radio is not connected. What am I doing wrong?
>>
>> Sent from my iPad
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>> Hi Dave, I don't believe there will be a need to be concerned with 
>> the port number if the prolific 2303 driver is downloaded and 
>> installed. when I did that it immediately recognized the circuitry in 
>> the patch cord.
>>
>> On Nov 5, 2015 1:51 PM, "dmdfacp at gmail.com 
>> <mailto:dmdfacp at gmail.com>" <dmdfacp at gmail.com 
>> <mailto:dmdfacp at gmail.com>> wrote:
>>
>>     How about your serial port ?  I just jumped in, so forgive me if
>>     I'm redundant.
>>     If you do not know which port is being used, unplug your
>>     USB-to-radio cable at the computer end. Re-plug it and watch for
>>     a small notice specifying the port to which the computer
>>     connected it. Verify that CHIRP is looking at the correct port.
>>     I just went through this, within the past half hour. Good luck.
>>     I'm a newbie, here, too.
>>     Dave
>>
>>     Sent from my iPhone
>>     DSP
>>
>>     On Nov 5, 2015, at 1:08 PM, Ray Nelson via chirp_users
>>     <chirp_users at intrepid.danplanet.com
>>     <mailto:chirp_users at intrepid.danplanet.com>> wrote:
>>
>>     I've downloaded the software & installed. I keep getting error
>>     message the radio is not connected. What am I doing wrong?
>>
>>     Sent from my iPad
>>     _______________________________________________
>>     chirp_users mailing list
>>     chirp_users at intrepid.danplanet.com
>>     <mailto:chirp_users at intrepid.danplanet.com>
>>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>     To unsubscribe, send an email to
>>     chirp_users-unsubscribe at intrepid.danplanet.com
>>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>
>>     _______________________________________________
>>     chirp_users mailing list
>>     chirp_users at intrepid.danplanet.com
>>     <mailto:chirp_users at intrepid.danplanet.com>
>>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>     To unsubscribe, send an email to
>>     chirp_users-unsubscribe at intrepid.danplanet.com
>>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151105/2a6037c7/attachment.html