[chirp_users] Cable driver needed

[Jim Unroe]

On Sat, May 30, 2015 at 4:00 PM, Dave Gomberg <dave1 at sfwcf.com> wrote:
> Running XP Home SP3, using a USB port to drive an Icom programming
> cable part# 4566-7831.
> I need a link to the appropriate driver to support this cable as a
> serial device for Chirp.
> I am pretty sure I used to have one but it seems to have disappeared.
> Many thanks for your help.
>
>
> --
> Dave Gomberg, San Francisco   NE5EE     Programming since 1961
> All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html

Dave,

Assuming that you have a programming cable with a Prolific type
USB-to-TTL chip, the driver that you need is v2.0.2.1 and there is a
link to it on the miklor.com website.

http://www.miklor.com/COM/UV_Drivers.php

Jim KC9HI