[chirp_users] Cable driver needed

[Dave Gomberg]

At 13:35 5/30/2015, Jim Unroe wrote:
>On Sat, May 30, 2015 at 4:00 PM, Dave Gomberg <dave1 at sfwcf.com> wrote:
> > Running XP Home SP3, using a USB port to drive an Icom programming
> > cable part# 4566-7831.
> > I need a link to the appropriate driver to support this cable as a
> > serial device for Chirp.
> >
>Dave,
>Assuming that you have a programming cable with a Prolific type
>USB-to-TTL chip, the driver that you need is v2.0.2.1 and there is a
>link to it on the miklor.com website.
>http://www.miklor.com/COM/UV_Drivers.php
>Jim KC9HI


Thanks Jim, that worked FB




-- 
Dave Gomberg, San Francisco   NE5EE     Programming since 1961
All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html
-----------------------------------------------------------------