[chirp_users] Icom 2200H / with

[Todd Bloomingdale]

90 percent of the time it comes down to driver issues. Even if the seller
sent a drivers with doesn't mean its compatible. See the miklor.com and the
link attached. This will walk you through the driver issues step by step
and download locations.

http://www.miklor.com/COM/UV_Drivers.php

Todd Bloomingdale
Tomah, WI
On Jan 27, 2015 10:09 AM, "KB1PWN KB1PWN" <kb1pwn at gmail.com> wrote:

> I bought a SECUDA USB Programming Cable For Icom Radio ... 1-pin 122-053
> from Amazon.  It has a PL2303TAchip in it.
>
>
> I used the PL2303_Prolific_DriverInstaller_v1.10.0 from the vendor.
>
>
> I used the vendor's program - checkChipVersion_v1006 – and it recognizes
> chip in cord on COM3
>
>
> When I use CHIRP to try to download the current frequencies on the radio,
> I get the following error: "Failed to communicate with the radio:
> Unexpected response from radio"
>
>
> Any help would be appreciated, even if that help tells me that I need to
> contact the seller, Sundely @ Amazon about a bad cord.
>
>
> Thank you, in advance for your help.
>
>
> Seth - KB1PWN
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150127/39be65c1/attachment.html