[chirp_users] frequency to chabnnel

[John LaMartina]

Bill,
Go to http://www.miklor.com/UV82
Proceed to Manual Keypad Programming.
There you will find Programming Examples and Flowcharts along with an extensive FAQ section.

Using CHIRP, switching from Channel mode to Frequency mode is not necessary.
CHIRP is much quicker and easier if you are not ‘In the Field’.

John

http://www.miklor.com





 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jack
Sent: Friday, January 09, 2015 8:59 AM
To: 'Bill Bates'; 'Discussion of CHIRP'
Subject: Re: [chirp_users] frequency to chabnnel

 

I’m new so cannot answer the first question. To start scanning just press the scan key in the lower left corner of the keypad (on the UV-82L, anyway)

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Bill Bates
Sent: Friday, January 09, 2015 12:15 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] frequency to chabnnel

 

GREETINGS TO ALL.

CAN SOMEONE TELL ME IN SIMPLE STEP TERMS HOW TO  MOVE A FREQUENCY FROM FREQUENCY MODE TO STORE INTO A CHANNEL OF MY UV8.

 

NO SPLIT OR CCTSS NEEDED.....A SIMPLE PUBLIC BAND FREQUENCY INTO A CHANNEL.

 

ALSO HOW DOES ONE BEGIN THE CHANNEL SCAN PROCESS?

 

 

 

 

The New Year lies before you, like a spotless tract of snow.........Be careful how you tread on it for every mark will show

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150109/830c5a4f/attachment.html