[chirp_users] Special Mode?
David B. Horvath, CCP
Wed Jan 7 18:08:02 PST 2015
I want to be able to program in frequencies that aren't in the normal
HAM range. My intent is to monitor those frequencies -- I'm not
planning on transmitting. I realize this isn't a good choice but
better than carrying multiple radios. I can program these frequencies
by hand but the software tries to "protect me from myself".
UV-5RB
Is that possible?
- David
At 03:00 PM 1/7/2015, chirp_users-request at intrepid.danplanet.com wrote:
>Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
>You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of chirp_users digest..."
>
>
>Today's Topics:
>
> 1. Support for Icom IC-7100 (Bob Nielsen)
> 2. Feidaxin FD-268A (Richard AG5M)
> 3. Re: Support for Icom IC-7100 (Tom Hayward)
> 4. Re: Yaesu FT-8100? (Tom Hayward)
> 5. Re: Unsupported Firmware (Jim Unroe)
> 6. Re: Feidaxin FD-268A (Grant Diffey)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Tue, 6 Jan 2015 12:51:03 -0800
>From: Bob Nielsen <n7xy at clearwire.net>
>Subject: [chirp_users] Support for Icom IC-7100
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <D2836824-703E-4DD6-AE4A-9094042BA012 at clearwire.net>
>Content-Type: text/plain; charset=us-ascii
>
>Is Chirp support planned for the Icom IC-7100?
>
>Bob, N7XY
>
>
>
>------------------------------
>
>Message: 2
>Date: Tue, 6 Jan 2015 15:04:36 -0800
>From: Richard AG5M <ag5m at yahoo.com>
>Subject: [chirp_users] Feidaxin FD-268A
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <1420585476.96613.YahooMailBasic at web164004.mail.gq1.yahoo.com>
>Content-Type: text/plain; charset=us-ascii
>
>How can I request CHIRP to develop the programming for the Feidaxin
>FD-286A? I saw no place to make such a request on their website.
>Or for that matter, does anyone know of software to program this
>little Chinese HT. It's actually quite a nice little
>thing. Thanks, Richard AG5M
>
>
>------------------------------
>
>Message: 3
>Date: Tue, 6 Jan 2015 15:19:32 -0800
>From: Tom Hayward <tom at tomh.us>
>Subject: Re: [chirp_users] Support for Icom IC-7100
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAFXO5Z17caPioWOy9x1X705bTZmpP-X3NjcE=9H+3RQGraekxQ at mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>On Tue, Jan 6, 2015 at 12:51 PM, Bob Nielsen <n7xy at clearwire.net> wrote:
> >
> > Is Chirp support planned for the Icom IC-7100?
> >
> > Bob, N7XY
>
>http://chirp.danplanet.com/issues/1003
>
>Looks like none of the developers have an IC-7100.
>
>Tom KD7LXL
>
>
>------------------------------
>
>Message: 4
>Date: Tue, 6 Jan 2015 15:30:58 -0800
>From: Tom Hayward <tom at tomh.us>
>Subject: Re: [chirp_users] Yaesu FT-8100?
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAFXO5Z1hRxXO=jzXV4DkFMOK+DYQ7-RN3qqP6_VdQfWWXKetSg at mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>On Mon, Jan 5, 2015 at 6:08 PM, Eric Allen <eric at hackerengineer.net> wrote:
> > Hey folks,
> >
> > I recently picked up a Yaesu FT-8100, and I'm looking to program it with
> > CHIRP. Has anybody else given this bad boy a shot? It looks to be
> > programmable, so I'm hoping to adapt the CHIRP support for one of the other
> > Yaesu mobiles, but I'm hoping maybe it's actually easier than that.
>
>Yaesus are generally pretty easy to write support for. They all use
>the same clone "protocol" (really just a dump of their memory with no
>protocol per se). Start with a similar model and try a Download From
>Radio. If it's an exact match, everything will work fine. If not, an
>error will be reported. You'll want to save the .img and inspect it
>with a hex editor after the failed download. Tweak memsize to make
>sure you get the whole thing.
>
>This type of conversation is more appropriate for the chirp_devel list:
>http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
>
>Tom KD7LXL
>
>
>------------------------------
>
>Message: 5
>Date: Tue, 6 Jan 2015 19:22:18 -0500
>From: Jim Unroe <rock.unroe at gmail.com>
>Subject: Re: [chirp_users] Unsupported Firmware
>To: Greg Hicks <grizhicks at yahoo.com>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CADnO8U5PqKCTBu_RZGC=YypwT5ZNCB6pNHTWQ57uXkFZbuMjXA at mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>On Tue, Jan 6, 2015 at 7:30 AM, Greg Hicks <grizhicks at yahoo.com> wrote:
> > Good Morning to All from new guy....
> >
> > Greg here in Indianapolis, and brand new to the group & using CHIRP. Just
> > received a BaoFeng BF-F8HP yesterday and have been playing with. I was
> > amble to download from radio, but not upload. When I try to upload a new
> > 'img' file, I get the following error message:
> >
> > Unsupported firmware version: N5R3401F8HP-1
> >
> > Not sure how to look for this, nor where to find.
> >
> > Thanks, in advance for any help..... Greg
> >
> > <===><===><===><===><===>
> > Greg Hicks, K9TLA
> > Hancock County CERT Program Manager
> > 317-501-5389 (cell)
> > <===><===><===><===><===>
>
>Greg,
>
>You currently should not be using the CHIRP stable build for any
>Baofeng/Pofung radios because of memory layout changes in the latest
>models. Also, the CHIRP stable build does not support the radios with
>3 power levels (see the Support Radios list on the CHIRP home page.
>Upgrade to the latest CHIRP daily build and you should be OK.
>
>Jim KC9HI
>
>
>------------------------------
>
>Message: 6
>Date: Wed, 7 Jan 2015 12:37:53 +1100
>From: Grant Diffey <gdiffey at gmail.com>
>Subject: Re: [chirp_users] Feidaxin FD-268A
>To: ag5m at yahoo.com, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CACckToX5Ek4W+TjD4d0UGdcSJUutan0d=Wc_fgt_GbQ9e5qFpg at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>Richard,
>
>Did you see:
>
>http://chirp.danplanet.com/projects/chirp/wiki/FAQ#How-can-I-get-my-radio-supported-by-CHIRP
>
>
>
>On Wed, Jan 7, 2015 at 10:04 AM, Richard AG5M <ag5m at yahoo.com> wrote:
>
> > How can I request CHIRP to develop the programming for the Feidaxin
> > FD-286A? I saw no place to make such a request on their website.
> > Or for that matter, does anyone know of software to program this little
> > Chinese HT. It's actually quite a nice little thing. Thanks, Richard AG5M
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150107/f6bbe7bd/attachment-0001.html
>
>
>------------------------------
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>End of chirp_users Digest, Vol 73, Issue 6
>******************************************
More information about the chirp_users
mailing list