[chirp_users] TYT programing software

[John LaMartina]

Rick,
If CHIRP programs the VHF/UHF side, but not the 220MHz range, you may need to submit this as an update request. 
http://chirp.danplanet.com/projects/chirp/issues
This is feature request queue/pool used by the developers.

John
http://www.miklor.com







 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rick Hanzlik via chirp_users
Sent: Tuesday, December 01, 2015 3:22 PM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] TYT programing software

 

I just purchased a TYT ThUV3R with the idea of using it for 220. It seems that the only way to activate the 220MHZ functions is to program it using the manufactures software. I down loaded verion 3.2.0.0 of the prolific driver and the manufactures software but when I try to access the radio, I will see the RW--COM displayed on the radio and I get a message the tells me to check the cables. However, I can program the radio using the latest daily CHIRP software without any problem, but it will not program the 220MHZ range. I realize this is the chirp group but I'm hoping someone can give me a suggestion as to how to make this all work.

 

 

Rick Hanzlik N7NGK Sandy, Ut

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151201/6e0b3556/attachment.html