[chirp_users] "Radio did not respond" msg

[John LaMartina ☀]

For error message definition, refer to http://www.miklor.com
Look under Common Error Messages

This should put you in the right direction.
John K3NXU
Http://www.miklor.com/uv5r 





On Mar 27, 2014, at 1:41 PM, Pete Miller <scmiller40 at gmail.com> wrote:

> Rookie Chirp user, did not find any info about this problem in FAQs and elsewhere:
> 
> Shortly after cloning starts, message is 
> Error ... Radio did not respond
> 
> Using: 
> CHIRP daily-20140324
> Win XP SP3 fully patched and upgraded
> Baofeng UV-5RE Plus, brand new [first radio ever for me]
> Radio works, AFAICT, I'm trying to use CHIRP to program it.
> Programming cable: USB Programming Cable for Baofeng UV-5R UV-3R+ Two way Radio With Driver CD -- Sold by Ham Radio Store 
> 
> Following these instructions from CHIRP Radio tab:
> Baofeng UV-5R Instructions
> 1. Turn radio off.
> 2. Connect cable to mic/spkr connector.
> 3. Make sure connector is firmly connected.
> 4. Turn radio on.
> 5. Ensure that the radio is tuned to channel with no activity.
> 6. Click OK to download image from device.
> 
> Have tried the instructions in both Frequency Mode and Channel Mode
> 
> Thanks for any guidance you can offer.
> 
> /scmiller40 at gmail.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140327/1277891b/attachment.html