[chirp_users] Disable Transmission on UV-82

[Rohm Thompson]

I stumbled a little on the first try but the second attempt worked fine.
 Thanks for the help.

Rohm


On Thu, Jun 12, 2014 at 4:03 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Thu, Jun 12, 2014 at 4:00 PM, Rohm Thompson <rohmthom at gmail.com> wrote:
>
>> Totally green, new user here trying to set up a Baofeng UV-82 to receive
>> only on one UHF channel.  I've had no problem using CHIRP to set up the
>> radio and use it normally but cannot figure out how to disable the transmit
>> function.  I have unchecked the VHF and UHF Tx Enabled check boxes but that
>> didn't stop transmission.  Any hints would be much appreciated.
>>
>> Rohm Thompson
>>
>
> Rohm,
>
> Jeff is correct.
>
> The "check boxes" for VHF TX Enabled and UHF TX Enabled are equivalent to
> the settings in the Baofeng VIP software. Changing the settings in CHIRP
> will not affect the radio because this function is not implemented in the
> radio. The settings in the OEM software cannot be changed because they are
> disabled (greyed out). The OEM software does correctly show the changes
> that have been made by CHIRP. The same goes for the UV-5R and it's many
> variants.
>
> Jim KC9HI
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140612/c4a869a7/attachment.html