[chirp_users] Baofeng UV-5R programming

[Brad NK8J]

Make sure your driver version is 3.2.0.0. Also make sure your cable is plugged in fully.

Sent from my LG Mobile

"kdufour ." <kdufour at gmail.com> wrote:

>Hi, cannot seem to get the Baofeng UV-5R (Firmware BFB297) to work with
>Chirp. I bought the radio and cable at the same time from Amazon. Whenever
>I hook it up to either a Mac running Mavericks or a PC running XP or 7  and
>try to download the radio I always get the same message - An error has
>occurred - the radio did not respond. I have the prolific drivers installed
>and in in the device manager I can see it pointing to com port 3.
>Any help would be appreciated.
>
>Thanks
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users


____________________________________________________________
Fast, Secure, NetZero 4G Mobile Broadband. Try it.
http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2