[chirp_users] Baofeng UV-5R programming

[kdufour .]

leaning toward bad cable. the only way I can insert it further  is to put
it in a vice!

really frustrating


On Tue, Jan 7, 2014 at 11:33 AM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Tue, Jan 7, 2014 at 11:06 AM, kdufour . <kdufour at gmail.com> wrote:
>
>> am running 2.0.2.1 for XP
>>
>>
>>
> If you are running this driver on XP and getting the "radio did not
> respond" error, then there are two possibilities. Either the programming
> cable is not fully plugged into the radio (the most likely cause) or the
> programming cable is defective (possible but not as likely).
>
> Many users swear that their programming cable is fully plugged in but are
> amazed when they give it a wiggle and a firm push and notice it go in just
> a little further. See the "Errors and Error Messages" page on the
> miklor.com website.
>
> http://www.miklor.com/HT/HT-ErrorMess.php#error1
>
> Jim KC9HI
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140107/806f5e76/attachment.html