[chirp_users] FT-60r not receiving "on frequency"

[Milton Hywatt]

Well I'm stumped here. I thought Menu #55 would allow a 2.5 step. 
And not having programmed these frequencies into my FT60 with with software I'm just
guessing. I'm sure someone will chime in and give you a yes or now
answer and how to do it. 

Good luck. 



________________________________
 From: Phil - w2lie <w2lie at w2lie.net>
To: chirp_users at intrepid.danplanet.com 
Sent: Monday, November 25, 2013 9:10 PM
Subject: Re: [chirp_users] FT-60r not receiving "on frequency"
 


The radio is setup for "Narrow" using menu 55, so that wasn't the issue.
The other thing  Notice is when I look at a channel that is off, I
      change the setting from Name to Freq, example again 477.3875
      becomes 377.3800.  But when I move down or up a single memory
      slot, then come back to 477.3875/477.3800 is then displays as
      477.3825.
Step size is setup for "Auto" in the radio, but coded in CHIRP as
      12.5

Even after reading back the radio in Narrow, I can't chose 2.5khz.


On 11/25/2013 8:24 PM, Milton Hywatt wrote:

Switch to NARROW mode and download your template. You
>should have the ability for 2.5 steps. If the software doesn't
        support
>it which I can think of no reason why, then you can manual
        program
>the steps in. Remember with the FT60 you have to recreate the
        channel
>structure in VFO mode then overwrite your channel to change. 
>
>The FT60 does support 2.5 steps when in narrow mode. How you
        match 
>that up with programming via Chirp I don't know because I've not
        done it
>with software. 
>
>Milton. 
>
>
>________________________________
> From: Phil - w2lie <w2lie at w2lie.net>
>To: chirp_users at intrepid.danplanet.com 
>Sent: Monday, November 25, 2013 8:14 PM
>Subject: Re: [chirp_users] FT-60r not receiving "on frequency"
> 
>
>
>Thanks for the advice Milton, but 2.5 isn't supported on this radio.
>Any other suggestions?
>
>
>
>On 11/25/2013 8:08 PM, Milton Hywatt wrote:
>
>Set the step resolution to 2.5 khz. That is if it is available. 
>>
>>
>>
>>
>>________________________________
>>
>>
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
>
>
>_______________________________________________
chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users 


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131125/378f3de9/attachment.html