[chirp_users] FT-60r not receiving "on frequency"

[Tom Hayward]

On Mon, Nov 25, 2013 at 5:01 PM, Phil - w2lie <w2lie at w2lie.net> wrote:
> Hi All,
> I'm trying to write to a FT-60r using the latest stable build and the
> latest dev build (2013-11-21).   Using both versions of software, it
> seems that the radio is failing to receive on the correct frequency,
> even though Chirp shows the correct data was entered.
>
> Example:  Saving 477.3875 with a step of 12.5khz is being received by
> the radio as 477.380.   I verified this by changing the memory settings
> from Alpha to Freq.  A frequency of 477.380 is displayed in that memory
> location.

It sounds like Chirp is not sending the right bits to the FT-60 for
that frequency, probably because it's an odd step size. Please submit
a bug report with the same description you posted here. If you have a
chance, save two channels from the front panel of your radio. One on
477.380 and on on 477.3875, but otherwise identical. Upload the img
with your bug report and I'll examine the difference between the two
channels you created.

http://chirp.danplanet.com/projects/chirp/issues/new

Tom KD7LXL