[chirp_users] Yaesu FT-7900R driver needed. I think :)

Mark Fernandez
Mon Mar 11 17:59:46 PDT 2013


Ah-haaaaa. I got it!!
I had to get it in RX mode to upload. :D


-mark

Sent from M. Fernandez

On Mar 11, 2013, at 8:46 PM, Apple //GS <apple2gs at sbcglobal.net> wrote:

> Okay.  First thank you and Dan so much!!  :)
> 
> Well, I got CHIRP to see the radio, after following what you said (I feel soooooo dumb, I should have re-read that stuff)  thanks.
> 
> I got CHIRp to download from the 7900.
> I then input some channels from the Repeater Book input.
> 
> The channels went in to the CHIRP spread sheet.
> 
> I then tried to upload back to the radio……………..
> 
> THis it what it says now:
> 
> Radio did not ack block at 0
> 
> -Mark
> 
> 
> 
> 
> On Mar 11, 2013, at 7:10 PM, Tom Hayward <esarfl at gmail.com> wrote:
> 
>> On Mon, Mar 11, 2013 at 3:50 PM, Apple //GS <apple2gs at sbcglobal.net> wrote:
>>> I turned the radio on while holding the "MHz/PRI" button.  Then turned the dial to F-7 CLONE
>>> 
>>> Should I do something else?
>> 
>> You missed a step. Page 66 of your manual:
>> 
>> To clone from one transceiver to a computer, use the following procedure:
>> 1. Insert the Cloning Cable into the DATA jack of the transceiver.
>> 2. Turn transceiver off, then press and hold in the [MHz(PRI)] key
>> while turning the power on again.
>> 3. Rotate the DIAL knob on each radio to select (F-7 CLONE), then
>> press and hold in the [BAND(SET)] key. The display will disappear for
>> a moment, then the “CLONE” notation will appear on the display.
>> 4. In Chirp, select Download From Radio
>> 5. Now, on the “Source” radio, press the [V/M(MW)] key. The “- - TX -
>> -” indicator will appear on the display, and the cloning data transfer
>> will immediately begin.
>> 6. If there is a problem during the cloning process, “ERROR” will be
>> displayed. Check your cable connections, and try again.
>> 7. If cloning was successful, “CLONE” will reappear the radio display.
>> Chirp will present your memory channels in a spreadsheet format.
>> 
>> Tom KD7LXL
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users



More information about the chirp_users mailing list