[chirp_users] CHIRP and the Boafeng UV-5RA
Tom Reis
Tue Jan 29 17:23:43 PST 2013
Thanks for the replies. I will check the version. I have had great success
with the UV-5R and UV-5R+. With this one, it could not do the read. Ill
try it again. Ill also get the latest CHIRP.
Thanks again, knowing that it should work, Ill try again.
73
Tom, NØVPR
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Leo Ryan
Sent: Tuesday, January 29, 2013 7:11 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] CHIRP and the Boafeng UV-5RA
Yes i have two radios of that type, one works, the other only half works
with Chirp. However the one that works works very well. You must check your
firmware version 1st, but the Chirp build at the address I am going to
provide here is for a wide range of firmware. You must really follow the
instructions to the letter. Find them here : http://miklor-uv5r.99k.org/
Leo Ryan
On 1/29/2013 6:19 PM, Tom Reis wrote:
Heloo,
Has anyone found a way to use CHIRP with the Baofeng UV-5RA?
Thanks,
73
Tom, NØVPR
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130129/700ef690/attachment.html
More information about the chirp_users
mailing list