[chirp_users] ICOM IC-2100H

[Dan Smith]

> Thank you for reply below.  One last question.  I see how the ToneSql
> can be enabled or disabled in the Tone mode selection now.  This
> allows either Tone, None, or ToneSql to be selected.  If the Tone
> Mode column enables or disables the info in the Tone and ToneSql
> columns, I can see how you could enable one or the other using the
> drop down menu selections (Tone, None, ToneSql).  If needed, how
> would you enable both Tone and ToneSql for a given frequency?
 
If you mean for split-tone operation, you don't. The two values are
stored so that you could switch from one tone to the other quickly in
the field, but there is no way to use a separate tone for transmit and
receive. Other brands of radios have this ability, but most amateur
Icoms do not.

Just for clarification: Tone mode implies just the Tone field is used
for transmit, no squelch tone on receive. TSQL mode implies that the
ToneSql tone is used for _both_ transmit and receive squelch.

-- 
Dan Smith
www.danplanet.com
KK7DS
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130224/3aad90cc/attachment.bin