[chirp_users] ICOM IC-2100H

[John W.]

Ignore that column.  It isn't used unless you have it selected as a squelch type 
on one of the columns before it.


>
>From: Lynch Scott-RTTV40 <rttv40 at freescale.com>
>To: "chirp_users at intrepid.danplanet.com" <chirp_users at intrepid.danplanet.com>
>Sent: Sun, February 24, 2013 5:23:48 PM
>Subject: [chirp_users] ICOM IC-2100H
>
>  
>I did a read from my Icom IC-2100 using Chirp.  All the memories that were in 
>the radio were loaded into chirp successfully, but there was one additional 
>column called ToneSql that was set for all channels to 88.5.  I do not use a 
>Receive  tone squelch on any of the channels, so not sure why this column is 
>showing up after the read from the radio.  Also, there does not seem to be a way 
>to set the ToneSql to not be active.  The drop down menu for each channel does 
>not have a “n/a” or “none” option,  just more tone frequencies.  
>
> 
>How do I make the tone squelch inactive for the receive so I can add some 
>frequencies to the current list and then write back to the radio?  Can I just 
>“hide” the ToneSql column and then when I do the write the ToneSql will not be 
>written  to the radio?
> 
>Scott Lynch
>Freescale Semiconductor
>MSG R&D
>480-413-2723
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130224/d3ed8576/attachment.html