[chirp_users] Uv5r not being programmed with additional settings

[Jim Unroe]

On Sat, Aug 3, 2013 at 7:19 PM, ima Ham <kk4sey at gmail.com> wrote:

> Understood, but they are the same release numbers, so that should not be
> an issue
>
> Further, how would you program the power up settings/  message, etc?
>
> It seems to be a great radio otherwise
>
> Robert
> KK4SEY
>
> Robert,

As far as I know, all firmware versions above BFB297 report as being BFB297
during the [6] + Power-On message. Using CHIRP, look at the Firmware
Message 1 on the Settings -> Other Settings menu to see the 'real' firmware
version. I'm sure you will find that each radio has a different firmware
version.

It is only the items on this menu (Other Settings) that do not get
transferred when there is a firmware version mismatch. This is also the
menu that you would use to edit the 'power up' messages.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130803/cdf846e3/attachment.html