[chirp_users] chirp_users Digest, Vol 56, Issue 3
Ed Drone
Sat Aug 3 23:35:10 PDT 2013
ima Ham, also. WØNYF They r nice radios, and they r in expensive and
modifible. THX (over ) 73 ok in the call book since 1953...
ima Ham wrote:
>
> Understood, but they are the same release numbers, so that should not
> be an issue
>
> Further, how would you program the power up settings/ message, etc?
>
> It seems to be a great radio otherwise
>
> Robert
> KK4SEY
>
> On Aug 2, 2013 7:01 AM, <chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>> wrote:
>
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
> <mailto:chirp_users-owner at intrepid.danplanet.com>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: Uv5r not being programmed with additional settings
> (John LaMartina)
> 2. Re: Uv5r not being programmed with additional settings (Jim
> Unroe)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 2 Aug 2013 09:53:57 -0400
> From: "John LaMartina" <JohnLa at usa.net <mailto:JohnLa at usa.net>>
> Subject: Re: [chirp_users] Uv5r not being programmed with additional
> settings
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID: <002401ce8f87$bc926230$35b72690$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> Robert,
>
> This is by design. It only occurs when the UV5R radios have
> different firmware releases.
>
> The only parameters that will not transfer are those in the
> Settings / Other Settings tab.
>
> Everything else should transfer properly.
>
>
>
> Due to the many firmware releases with the UV5R, this allows you
> to use the same image file to update multiple radios without
> requiring a separate .img file for each.
>
> The Settings / Other Settings tab mainly changes the Power On
> Messages which normally remain constant.
>
>
>
> Hope this helps.
>
> John K3NXU
>
>
>
> http://www.miklor.com/uv5r
>
>
>
>
>
>
>
> From: chirp_users-bounces at intrepid.danplanet.com
> <mailto:chirp_users-bounces at intrepid.danplanet.com>
> [mailto:chirp_users-bounces at intrepid.danplanet.com
> <mailto:chirp_users-bounces at intrepid.danplanet.com>] On Behalf Of
> ima Ham
> Sent: Friday, August 02, 2013 9:24 AM
> To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> Subject: [chirp_users] Uv5r not being programmed with additional
> settings
>
>
>
> When I program my uv5R, it transfers all frequencies and
> additional settings. I have a second UV 5 R and when I upload
> everything to
> that, it only transfers the frequencies, and not the additional
> settings. I've researched the error and have still not been able to
> correct it.
>
> Can someone explain if it is possible to correct this?
>
> Robert
> KK4SEY
> Miami
>
> On Aug 1, 2013 12:00 PM,
> <chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>> wrote:
>
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com>
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
> <mailto:chirp_users-owner at intrepid.danplanet.com>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: Bootable Chirp CD & Thumb-drive (Jeff Melton)
> 2. Re: Bootable Chirp CD & Thumb-drive (Tom Morris)
> 3. Re: Bootable Chirp CD & Thumb-drive (David Evans)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 31 Jul 2013 18:17:10 -0500
> From: Jeff Melton <W5JNM at ARRL.net>
> Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> To: chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> Message-ID: <51F99AF6.2000109 at ARRL.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Sorry to chase this rabbit trail, but my search of the wiki
> <http://chirp.danplanet.com/projects/chirp/wiki/Home> for the
> procedure
> you mention didn't return any results. Can someone kindly point this
> n00b in the right direction?
>
> Jeff
> W5JNM -at- ARRL
>
> On 7/30/13 11:14 PM, chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com> wrote:
> > Message: 7
> > Date: Tue, 30 Jul 2013 20:30:46 -0600
> > From: David Evans<kd7uch at gmail.com <mailto:kd7uch at gmail.com>>
> > Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> > To: Discussion of CHIRP<chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> > Message-ID:
> >
> <CAOFT+78F7iJBmt+eXtmAw_rk_Et79X+-iZ2gqENRWnRC5RT6UA at mail.gmail.com <mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA at mail.gmail.com>
> <mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA at mail.gmail.com
> <mailto:CAOFT%252B78F7iJBmt%252BeXtmAw_rk_Et79X%252B-iZ2gqENRWnRC5RT6UA at mail.gmail.com>>
> >
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Jim,
> > That is the way I crested mine. It is the procedure described
> in the wiki.
> >
> > Thanks,
> > David
> >
> > kd7uch at arrl.net <mailto:kd7uch at arrl.net>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 1 Aug 2013 13:15:30 -0400
> From: Tom Morris <blueneon at gmail.com <mailto:blueneon at gmail.com>>
> Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID:
>
> <CAEZ7Lt151U3weyVA9B4p+aO5eSPCunHifxGPe-tmDOgsWVxaRg at mail.gmail.com <mailto:CAEZ7Lt151U3weyVA9B4p%2BaO5eSPCunHifxGPe-tmDOgsWVxaRg at mail.gmail.com>
> <mailto:CAEZ7Lt151U3weyVA9B4p%2BaO5eSPCunHifxGPe-tmDOgsWVxaRg at mail.gmail.com
> <mailto:CAEZ7Lt151U3weyVA9B4p%252BaO5eSPCunHifxGPe-tmDOgsWVxaRg at mail.gmail.com>>
> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> If a fake flash drive is a concern, use H2TestW as mentioned here.
> http://fightflashfraud.wordpress.com/2008/11/24/h2testw-gold-standard-in-detecting-fake-capacity-flash/
>
> If the drive's good, it should work with no errors. If it's burned
> with a
> fake capacity, it'll let you know what the real capacity was.
>
> Also, if the drive is not fake but has a defect, it'll catch that
> too. I
> have had several Sandisk MicroSD cards go bad and H2TestW reminds
> me that
> the corruption problems aren't my fault, it's the card's... zowie!
>
>
> On Wed, Jul 31, 2013 at 7:17 PM, Jeff Melton <W5JNM at arrl.net
> <mailto:W5JNM at arrl.net>> wrote:
>
> > Sorry to chase this rabbit trail, but my search of the wiki
> > <http://chirp.danplanet.com/projects/chirp/wiki/Home> for the
> procedure
> > you mention didn't return any results. Can someone kindly point this
> > n00b in the right direction?
> >
> > Jeff
> > W5JNM -at- ARRL
> >
> > On 7/30/13 11:14 PM, chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com> wrote:
> > > Message: 7
> > > Date: Tue, 30 Jul 2013 20:30:46 -0600
> > > From: David Evans<kd7uch at gmail.com <mailto:kd7uch at gmail.com>>
> > > Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> > > To: Discussion of CHIRP<chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> > > Message-ID:
> > > <
> >
> CAOFT+78F7iJBmt+eXtmAw_rk_Et79X+-iZ2gqENRWnRC5RT6UA at mail.gmail.com
> <mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA at mail.gmail.com>
> <mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA at mail.gmail.com
> <mailto:CAOFT%252B78F7iJBmt%252BeXtmAw_rk_Et79X%252B-iZ2gqENRWnRC5RT6UA at mail.gmail.com>>
> >
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > Jim,
> > > That is the way I crested mine. It is the procedure described
> in the
> > wiki.
> > >
> > > Thanks,
> > > David
> > >
> > > kd7uch at arrl.net <mailto:kd7uch at arrl.net>
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
>
> --
> --
> Tom Morris, KG4CYX
> Mad Scientist and Operations Manager, WDNA-FM 88.9 Miami - Serious
> Jazz!
> Engineer, WRGP Radiate FM, Florida International University
> 786-228-7087 <tel:786-228-7087>
> 151.820 Megacycles
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130801/dd6e34d8/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Thu, 1 Aug 2013 11:32:38 -0600
> From: David Evans <kd7uch at gmail.com <mailto:kd7uch at gmail.com>>
> Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID:
>
> <CAOFT+79CPnVpbPk0HH0oMvpU0A1czqNQDLddWjp3XvWG=phhBA at mail.gmail.com <mailto:phhBA at mail.gmail.com>>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Thanks, Tom. I will have to check that. I don't know much about
> the fake
> drives and what you might get if you buy a drive from a discount
> house but
> that could very well be my problem. I will also try with a different
> thumb-drive.
>
>
> On Thu, Aug 1, 2013 at 11:15 AM, Tom Morris <blueneon at gmail.com
> <mailto:blueneon at gmail.com>> wrote:
>
> > If a fake flash drive is a concern, use H2TestW as mentioned here.
> >
> http://fightflashfraud.wordpress.com/2008/11/24/h2testw-gold-standard-in-detecting-fake-capacity-flash/
> >
> > If the drive's good, it should work with no errors. If it's
> burned with a
> > fake capacity, it'll let you know what the real capacity was.
> >
> > Also, if the drive is not fake but has a defect, it'll catch
> that too. I
> > have had several Sandisk MicroSD cards go bad and H2TestW
> reminds me that
> > the corruption problems aren't my fault, it's the card's... zowie!
> >
> >
> > On Wed, Jul 31, 2013 at 7:17 PM, Jeff Melton <W5JNM at arrl.net
> <mailto:W5JNM at arrl.net>> wrote:
> >
> >> Sorry to chase this rabbit trail, but my search of the wiki
> >> <http://chirp.danplanet.com/projects/chirp/wiki/Home> for the
> procedure
> >> you mention didn't return any results. Can someone kindly point
> this
> >> n00b in the right direction?
> >>
> >> Jeff
> >> W5JNM -at- ARRL
> >>
> >> On 7/30/13 11:14 PM, chirp_users-request at intrepid.danplanet.com
> <mailto:chirp_users-request at intrepid.danplanet.com> wrote:
> >> > Message: 7
> >> > Date: Tue, 30 Jul 2013 20:30:46 -0600
> >> > From: David Evans<kd7uch at gmail.com <mailto:kd7uch at gmail.com>>
> >> > Subject: Re: [chirp_users] Bootable Chirp CD & Thumb-drive
> >> > To: Discussion of CHIRP<chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> >> > Message-ID:
> >> > <
> >>
> CAOFT+78F7iJBmt+eXtmAw_rk_Et79X+-iZ2gqENRWnRC5RT6UA at mail.gmail.com
> <mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA at mail.gmail.com>
> <mailto:CAOFT%2B78F7iJBmt%2BeXtmAw_rk_Et79X%2B-iZ2gqENRWnRC5RT6UA at mail.gmail.com
> <mailto:CAOFT%252B78F7iJBmt%252BeXtmAw_rk_Et79X%252B-iZ2gqENRWnRC5RT6UA at mail.gmail.com>>
> >
> >> > Content-Type: text/plain; charset="iso-8859-1"
> >> >
> >> > Jim,
> >> > That is the way I crested mine. It is the procedure
> described in the
> >> wiki.
> >> >
> >> > Thanks,
> >> > David
> >> >
> >> > kd7uch at arrl.net <mailto:kd7uch at arrl.net>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>
> >
> >
> >
> > --
> > --
> > Tom Morris, KG4CYX
> > Mad Scientist and Operations Manager, WDNA-FM 88.9 Miami -
> Serious Jazz!
> > Engineer, WRGP Radiate FM, Florida International University
> > 786-228-7087 <tel:786-228-7087>
> > 151.820 Megacycles
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
>
>
> --
> Thanks,
> David
> kd7uch at arrl.net <mailto:kd7uch at arrl.net>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130801/e5575960/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 56, Issue 1
> ******************************************
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130802/1a785c77/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Fri, 2 Aug 2013 10:00:35 -0400
> From: Jim Unroe <rock.unroe at gmail.com <mailto:rock.unroe at gmail.com>>
> Subject: Re: [chirp_users] Uv5r not being programmed with additional
> settings
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID:
>
> <CADnO8U53w+N2dgztveyV1RB=tTxE===YRDJXAu0dEwz0jXYL9A at mail.gmail.com <mailto:YRDJXAu0dEwz0jXYL9A at mail.gmail.com>>
> Content-Type: text/plain; charset="iso-8859-1"
>
> On Fri, Aug 2, 2013 at 9:24 AM, ima Ham <kk4sey at gmail.com
> <mailto:kk4sey at gmail.com>> wrote:
>
> > When I program my uv5R, it transfers all frequencies and additional
> > settings. I have a second UV 5 R and when I upload everything to
> that, it
> > only transfers the frequencies, and not the additional settings.
> I've
> > researched the error and have still not been able to correct it.
> >
> > Can someone explain if it is possible to correct this?
> >
> > Robert
> > KK4SEY
> > Miami
> >
> > Robert,
>
> Your two radios have different firmware versions. When the
> firmware version
> of the CHIRP image that you are uploading is different than the
> firmware
> version in the radio you are uploading it to, CHIRP stops short of
> transferring the 'Other Settings'. I wish the message that is returned
> could be toned down a bit. It needs look less like an error
> message and
> look more like and FYI. Anyway, this is the way CHIRP is designed to
> behave. Most of the 'settings' of the radio are transferred. It is
> only the
> settings on the 'Other Settings' menu that aren't uploaded.
>
> Transferring the 'Other Settings' to a radio that has a different
> firmware
> version than the radio it was originally downloaded from, can cause
> unwanted issues with the radio. This is because the memory layout
> changed
> when Baofeng released firmware version BFB291.
>
> Most of the time, you don't want the 'Other Settings' changed
> anyway. If
> you do, upload the settings. Close the notification that the 'Other
> Settings' weren't transferred. Download the settings from the
> radio. Tweak
> the 'Other Settings'. Upload the settings back to the radio.
>
> Jim KC9HI
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130802/921117d0/attachment.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 56, Issue 3
> ******************************************
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130804/790e7c73/attachment.html
More information about the chirp_users
mailing list