[chirp_users] 857D problem

[Joseph Skoler]

Hi,

I just installed Chirp to program my new 857D.  The interface/cable is working fine -- able to download/upload memories to/from the radio.

My problem is that none of the UHF/VHF memories work on the rig if they're programmed using Chirp.

That is, they're in memory and I can receive on them just fine.  But, transmitting does not appear to work -- cannot key up the repeaters.

I have quadruple checked the offset direction/amount as well as the PL.

The 10 meter memory entries work fine.

I have an SWR meter on the HF antenna port and it moves a tiny amount when I'm transmitting on a memory channel programmed to a VHF or UHF frequency, as if it's putting the signal out the HF port.

When I program the memories manually everything works fine.

What am I doing wrong?

thank you,

Joseph, kc2yu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20120325/f72411c1/attachment.html