<html><body><div style="color:#000; background-color:#fff; font-family:arial, helvetica, sans-serif;font-size:10pt"><div><br></div><div>Hi,</div><div><br></div><div>I just installed Chirp to program my new 857D. The interface/cable is working fine -- able to download/upload memories to/from the radio.</div><div><br></div><div>My problem is that none of the UHF/VHF memories work on the rig if they're programmed using Chirp.</div><div><br></div><div>That is, they're in memory and I can receive on them just fine. But, transmitting does not appear to work -- cannot key up the repeaters.</div><div><br></div><div>I have quadruple checked the offset direction/amount as well as the PL.</div><div><br></div><div>The 10 meter memory entries work fine.</div><div><br></div><div>I have an SWR meter on the HF antenna port and it moves a tiny amount when I'm transmitting on a memory channel programmed to a VHF or UHF frequency, as if it's putting the signal
out the HF port.</div><div><br></div><div>When I program the memories manually everything works fine.</div><div><br></div><div>What am I doing wrong?</div><div><br></div><div>thank you,</div><div><br></div><div>Joseph, kc2yu</div></div></body></html>