[chirp_users] Cannot download from Wouxun UV-3D

[Robert Terzi]

A common problem with the Wouxun's is the programming cable is a
very tight fit and doesn't get all the way inserted.  Make sure you
feel a "click" when plugging the cable into the radio.


On 6/6/2012 2:55 PM, Bob Nielsen wrote:
> I recently purchased a Wouxun UV-3D plus the programming cable and installed Chirp on my Mac Mini running OS X 10.7.4.  I also installed the Python runtime package mentioned in the wiki.
>
> I needed to install a Prolific USB driver before /dev/cu.usbserial appeared as a port choice.
>
> I have a couple of manual entries stored so I figured that the program would download them but when I click "OK" a window labeled "Clone" appears.  After several seconds I get a window saying the radio is not responding.
>
> Is there a step I missed?
>
> 73, Bob N7XY
> _____
> N7XY DX Cluster Node - telnet to n7xy.net, port 7300
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users