[chirp_users] Chirp not identifying Kenwood TM-V71

Dale Mosby
Fri Feb 10 11:55:20 PST 2012


Thanks for the suggestions. Evidently with the V71 as first choice I was
fooled into thinking
that Chirp was conversing with the radio.

I think the problem may be something called "modem-manager".

I checked Menu #519 "PC terminal baud rate speed" and found that it was
9600 baud.
The manual indicates that this is default and I found this to be the case.
I also checked that the interface cable is securely mated with the
microphone jack.

I checked the /var/log/syslog file on Ubuntu and found that after
connecting the USB device
the "modem-manager" was opening and closing the USB0 port. This is
something I had
not heard of before. It was not immediately clear how to terminate this, if
the process was
killed it was respawned.

I hoped that this was a feature (mis-feature?) on Ubuntu so switched to a
laptop with RHEL 6.2.
One again, after plugging in the USB connector I found that modem-manager
was fussing with the port.
Could this be getting in the way somehow? I see the same behavior in which
radio is not detected.

Here is the /var/log/messages from the RHEL 6.2 system:
Feb 10 10:58:11 dalew500 kernel: usb 6-2: new full speed USB device using
uhci_hcd and address 4
Feb 10 10:58:11 dalew500 kernel: usb 6-2: New USB device found,
idVendor=10c4, idProduct=ea60
Feb 10 10:58:11 dalew500 kernel: usb 6-2: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
Feb 10 10:58:11 dalew500 kernel: usb 6-2: Product: CP2102 USB to UART
Bridge Controller
Feb 10 10:58:11 dalew500 kernel: usb 6-2: Manufacturer: Silicon Labs
Feb 10 10:58:11 dalew500 kernel: usb 6-2: SerialNumber: 0567000FAC37
Feb 10 10:58:11 dalew500 kernel: usb 6-2: configuration #1 chosen from 1
choice
Feb 10 10:58:11 dalew500 kernel: usbcore: registered new interface driver
usbserial
Feb 10 10:58:11 dalew500 kernel: USB Serial support registered for generic
Feb 10 10:58:11 dalew500 kernel: usbcore: registered new interface driver
usbserial_generic
Feb 10 10:58:11 dalew500 kernel: usbserial: USB Serial Driver core
Feb 10 10:58:11 dalew500 kernel: USB Serial support registered for cp210x
Feb 10 10:58:11 dalew500 kernel: cp210x 6-2:1.0: cp210x converter detected
Feb 10 10:58:12 dalew500 kernel: usb 6-2: reset full speed USB device using
uhci_hcd and address 4
Feb 10 10:58:12 dalew500 kernel: usb 6-2: cp210x converter now attached to
ttyUSB0
Feb 10 10:58:12 dalew500 kernel: usbcore: registered new interface driver
cp210x
Feb 10 10:58:12 dalew500 kernel: cp210x: v0.09:Silicon Labs CP210x RS232
serial adaptor driver
Feb 10 10:58:12 dalew500 modem-manager: (ttyUSB0) opening serial device...
Feb 10 10:58:24 dalew500 modem-manager: (ttyUSB0) closing serial device...
Feb 10 10:58:24 dalew500 modem-manager: (ttyUSB0) opening serial device...
Feb 10 10:58:30 dalew500 modem-manager: (ttyUSB0) closing serial device...

I tried the USB cable for the Wouxon hand held radio and was able to
download from that radio.
Here is the /var/log/messages file. Note that no mention of "modem-manager".

Feb 10 11:20:54 dalew500 kernel: usb 3-1: new full speed USB device using
uhci_hcd and address 2
Feb 10 11:20:54 dalew500 kernel: usb 3-1: New USB device found,
idVendor=067b, idProduct=2303
Feb 10 11:20:54 dalew500 kernel: usb 3-1: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
Feb 10 11:20:54 dalew500 kernel: usb 3-1: Product: USB-Serial Controller
Feb 10 11:20:54 dalew500 kernel: usb 3-1: Manufacturer: Prolific Technology
Inc.
Feb 10 11:20:54 dalew500 kernel: usb 3-1: configuration #1 chosen from 1
choice
Feb 10 11:20:54 dalew500 kernel: USB Serial support registered for pl2303
Feb 10 11:20:54 dalew500 kernel: pl2303 3-1:1.0: pl2303 converter detected
Feb 10 11:20:54 dalew500 kernel: usb 3-1: pl2303 converter now attached to
ttyUSB0
Feb 10 11:20:54 dalew500 kernel: usbcore: registered new interface driver
pl2303
Feb 10 11:20:54 dalew500 kernel: pl2303: Prolific PL2303 USB to serial
adaptor driver

What do you think? Is modem-manager involved in the problem or is it
something else?
Has the Kenwood USB cable been used with Linux and a V71?
Other suggestions welcomed.
73, Dale, K7FW
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20120210/5eed4290/attachment.html 


More information about the chirp_users mailing list